Door system

Modular, flexible, individual.

petWALK pet doors are not only the world's first professional front doors designed specifically for pets, but they can also be flexibly adapted to your personal needs and structural conditions.

Door module

The petWALK door module is the heart of your personal pet entrance solution and already includes the entire range of functions. It is available in two different sizes, with different hinged door leaves and for all conceivable installation situations.

The construction is based on two frames - the outer frame 1 (also called "outer flange") and the inner frame 2 ("inner flange") - which are pressed together and thus also onto a component with a suitably large opening by means of threaded rods 3 . Motors, the automatically moving door leaf, locking mechanisms, fittings and electronics are attached to the outer flange. The inner flange contains a display, the display electronics and the receiver unit for the remote control.

Design elements

Decorative panels 4 (for example made of acrylic or HPL material) can be attached to the respective outside.

Extensions

If the clamped component is very narrow (< 5 cm), a so-called spacer 5 is required to create the necessary distance for clamping. However, if a large distance is to be bridged, such as when installing in a wide wall, a suitable Tunnel 6 connects the outer frame with the inner frame.

If very high insulation values are required, an additional insulation level 7 can be attached to the outer frame or it can be over-insulated by the wall insulation when installed in the masonry.